Sponsored Editorial

Where does water come from, how does water get to taps and why does making the most of it matter? South East Water explains it all.

All water we use from the tap originally comes from the environment, from more sources than you probably realise.

Let’s start with reservoirs. Most people know reservoirs are a source of water, and when they’re full you may think that’s OK, right? Not quite. They’re not the only source of water.

In fact, at South East Water, reservoirs only make up about 8% of where they get their water from. The rest comes from underground water sources: aquifers, boreholes, and chalk streams. Let’s come on to those in a moment.

But these sources, which are called ‘raw water’, are only half the water production story. Can you guess the other half?

Well, it’s already been mentioned…the water we use, or more importantly how much of it we use. It’s not just people who need these water sources. Trees, plants, crops, wildlife, livestock, fish, birds, and insects – indeed all flora and fauna – depend on the same water to survive and thrive.

The more water that we take the less there is to go around for everything else. Producing more is not that simple, because these precious sources of water need to be protected, and building infrastructure takes a long time. The best way is to be mindful of water use, and there are lots of small ways to save water in the home and garden, see here.

So, what exactly are aquifers, boreholes and chalk streams?

Aquifers

An aquifer is an underground body of rock or sediment that holds water.

Boreholes

The water from aquifers can be extracted from the ground through boreholes by pumps, like a giant straw that enters aquifers and sucks the water out.

Chalk streams

There are only around 200 chalk streams in the world, most of which are in the southern half of England (with a few in France), which makes them even more special.

These are rivers that rise from springs and have chalk bedrock. As the chalk is spongy, rainwater easily moves through the ground and to the chalk streams.

How does it get to taps?

Once the raw water is collected, South East Water put it through a rigorous and highly regulated cleaning process. Nine treatment procedures make the water clean and safe enough to drink.

Once treated, the water is moved to storage reservoirs around the network and pushed out through the 9,000 miles of pipes that connect to customers’ properties. Usually, it takes around two hours to treat and store water so that it’s ready to be used.

When the demand for water is high, the amount of treated water stored in the storage reservoirs drops. This is replaced, however, in times of extreme demand, if more water is used than which we can replenish, some customers can experience low pressure or no water.

This is why making the most of every drop matters. Simple swaps and shifts in mindset, such as using a watering can and showering for one less minute, can save you more water and money than you might think!

To do our bit in saving water, we spend £40 million a year managing and reducing leaks and have 52 leak repair teams and 60 leak detection experts using innovative technologies in our supply region.

We also continually invest in our infrastructure where between 2020 and 2025 we're investing more than £489 million to develop new resources, extend and upgrade treatment works and lay new water mains.

It doesn’t stop there either, we have been working on our future plans, and you can find out all about those here.